Hanna Instruments Taiwan
The Hanna Advantage: A Worldwide Leader in Technology and Innovation 100% Quality  360 Value
Contact Hanna: +886-2-8797-2918
Hanna Instruments Worldwide
Customer Support: +1 (800) 426-6287

Wall Mounted EC Digital Controller HI23211

HI2321 is a wall mounted, microprocessor conductivity controller specifically designed to meet your process control requirements. This controller provides very accurate measurements due to the four-ring EC probe and Automatic Temperature Compensation (ATC) feature.

  • Fail Safe Alarm System.
  • CAL Check™ alerts users of calibration status.
  • Four-ring method provides an exceptionally stable measurement over a wider range.

Description

Fail Safe Alarm System

  • Hanna’s exclusive Fail Safe Alarm System protects against problems caused by power supply failure or signal interruption, which are typical risks in industrial environments. An alarm condition is indicated by a red LED, located directly on the front panel of the controller.

Simple Installation

  • HI22111 has mounting holes molded into the housing to assure simple, quick and secure installation without the need for additional hardware.

Isolated Recorder Output

  • To enhance troubleshooting and the ability to record data while monitoring, simply attach a recording device to the instrument’s 4 to 20 mA output contacts, conveniently located on the front panel, to obtain a copy of the results on demand.

Good Laboratory Practices (GLP)

  • The GLP feature allows users to store and recall data about system status for ultimate traceability.

Quality Construction

  • Housed in a rugged, modular, fiber-reinforced polypropylene housing that will resist the harmful effects of most chemicals.

Password Protection

  • The Hanna password protection feature keeps these controllers safe from tampering. Only users with the proper password can change the settings of these controllers.

Additional information

Weight 2.19 kg
EC Accuracy

0.5% f.s.

EC Calibration

1 point, automatic

EC Range

0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm

EC Resolution

0.1 mS/cm, 0.1 µS/cm, 1 µS/cm; 0.01 mS/cm

Temperature Accuracy

±0.5 °C (0 to 70°C); ±1 °C (outside)

Temperature Range

10.0 to 100.0°C

Specifications

SKU HI23211-1
Name Wall Mounted EC Digital Controller HI23211
EC Range 0.0 to 199.9 µS/cm; 0 to 1999 µS/cm; 0.00 to 19.99 mS/cm; 0.0 to 199.9 mS/cm
EC Resolution 0.1 µS/cm, 1 µS/cm; 0.01 mS/cm, 0.1 mS/cm
EC Accuracy 0.5% f.s.
EC Calibration automatic, 1 point
EC/TDS Temperature Compensation automatic or manual from -10 to 100°C with Pt100 probe; β adjustable from 0.00 to 10.00%/°C
Temperature Range 10.0 to 100.0°C
Temperature Resolution 0.1 °C
Temperature Accuracy ±0.5 °C (0 to 70°C); ±1 °C (outside)
Consent Relay electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A – 30 VDC (resistive load) (HI211YZ and HI212YZ), fuse protected: 5A, 250V fast fuse
Alarm Relay Set Point electromechanical relay SPDT contact output, 5A – 250 VAC, 5A – 30 VDC (resistive load) fuse protected: 5A, 250V, 250V fast fuse
Analog Ouput Signal 0-10 VDC, 0-5 VDC or 1-5 VDC; 0-1mA, 0-20 mA or 4-20mA
Digital Output Signal RS485
Baud Rate RS 485 baud rate 1200, 2400, 4800 and 9600
Power Consumption 15 VA
Over Current Protection 400 mA, 250V, fast fuse
Enclosure Fiber-reinforced, self-extinguishing ABS
Installation Category II
EC/TDS Probe four-ring conductivity probe with built-in 3-wire Pt100 temperature sensor or conductivity probe + external Pt100 (not included)
Display LCD
Power Supply 115 ±10% VAC
Environment 0-50 °C; RH max 85% non-condensing
IP Rating IP54
Dimensions 221 x 181 x 86 mm (8.7 x 7.1 x 3.4”)
Weight 1.6 kg (3.5 lb.)

Ordering Info

Supplied with instructions.

Manuals

Wall Mounted EC Digital Controller HI23211